UC 800CL Undersink Chiller with Infra Red Sensor

New In

The UC800CL Undersink Chiller With Contactless Tap

Undersink chiller with contactless swan neck tap to avoid hand to tap contamination

Product Specification

The Infra Red Sensor is activated by a hand hovering over the Infra Red Sensor at a distance of 2cm to 5cm
The Sensor is connected to an Inlet Solenoid valve which opens the water supply when activated, and stops the water flowing when the hand is removed
The Solenoid Valve is powered by two 3V batteries with a tested life span of 86.000 Solenoid activations
The UC800CL has a cold water capacity of 5 ltr/h with an instant draw off of 1.5ltr below 10˚C, from an influent temperature of 26˚C.
The Tap comes with fittings to connect to ¼” LDPE pipe Chiller
The Contactless tap is programmed to stop dispensing after 6 seconds. If that is insufficient to fill your glass or bottle, place your hand again over the sensor to continue dispensing

Dimensions/Weight:

Brochure Thumb:

Technical Drawing & Parts List:

Technical Thumb: